Cable Tester & Find Wire Tracker

Attribute (E. G.: Size): Value (E. G.: 12 Inches)
Trademark: ShowRange
Origin: Shanghai
Gold Member Since 2006

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
CT8208, CT308, CT838

Product Description

CT838 Network Cable Tester & Multipurpose LCD Cable Tester
Technical indexes:
(1) Overall dimension: Emitter: 185x80x32mm; Receiver: 218x46x29mm; Remote identifier: 107x30x24mm
(2) Power: Two laminated batteries of 9V
(3) Display: Large screen LCD segmented display (effective visual area 54x26mm)
(4) Type of cable tested: RJ 45/RJ11/BNC/USB/1394 and other different types
(5) Type of cable detected: RJ 45/RJ11/BNC/USB/1394 and other metal wires
(6) Ambient temperature in work: -10° C~+60° C
(7) Signal transmission distance: More than 3 km
(8) Location of wire order and cable failure: Failure test, open circuit, short circuit, reversed position,

CT308 Multipurpose Network Cable Test #Inspection Instrument with lot of NEW Functions
Technical indexes:
(1). Overall dimension: Main tester: 185× 105× 50mm; Receiver: 218× 46× 29mm;
Remote identifier: 84× 34× 27mm.
(2). Power: Two laminated batteries of 9V.
(3). Display: Special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2 mm).
(4). Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line.
(5). Type of cable detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires.
(6). Ambient temperature in work: -10° C~+60° C
(7). Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), hunting RJ45 port (With RJ45);
Remote identifier RJ45 port (R). The extra BNC and RJ11 converters are used to measure and check the
Continuity of coaxial cable and telephone line.
(8). Length Measurement of Twin Twisted Cable
Scope: 1~350 M ( 3 ~200 ft)
Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft). (AMP, AT&T Class 5 cable)

CT8208 Cable Tester & Find Wire Tracker
Technical indexes:
(1). Overall dimension: Main tester: 180× 80× 40mm; Receiver: 218× 46× 29mm;
Remote identifier: 77× 31× 21mm.
(2). Power: Main tester uses 6V DC for power supply; Receiver uses 9V battery for power supply.
(3). Display: Special 4 x 16 character big screen LCD lattice (valid visual field 61.6 x 25.2 mm).
(4). Type of cable tested: STP/UTP twin twisted cable, coaxial cable, telephone line.
(5). Type of cable detected: 5E, 6E, telephone wire, coaxial cable and other metal wires.
(6). Ambient temperature in work: -10° C~+60° C
(7). Tester Port:
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L),
Hunting RJ45 port (SCAN);
Remote identifie RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
(8). Length Measurement of Twin Twisted Cable:
Scope: 1~350 M ( 3 ~200 ft)
Calibration accuracy: 3% (+/- 0.5M or +/- 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy: 5% (+/- 0.5 M or +/- 1.5 ft). (AMP, AT&T Class 5 cable) Display: M or ft.
(9). Length Calibration: User can set calibration factor by himself with a given length cable.
The length of calibrating cable is more than 5 M.
(10). Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference.
(11). Locating Cable: 8 Remote identifier test jacks (ID 1 ≥ ID 8).
(12). Automatic Time-delay Shut Off Time: The tester does not operate for 30 minutes.

Send your message to this supplier

*From:
*To:
avatar Mr. Boris
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Gold Member Since 2006

Suppliers with verified business licenses

Manufacturer/Factory
Type of Ownership
Limited Company