Cic-152: Dual Control Dosing/Injection TDS/Ec Controller
-Protective cover also available (sold separately)
-Available with the NaCl conversion factor (model CIC-152-N) or the 442TM conversion factor (model CIC-152-4).
-Monitors and controls dosing or injection systems.
-Large, bright tri-color L.E.D. display.
-Two adjustable set points keep TDS levels within a range (maximum and minimum TDS/EC levels).
-Minimum and maximum control points will activate relay controls via switching dry contacts.
-The CIC-152 can control two different devices (e.g., a pump and a valve).
-Two alarms (maximum and minimum levels) can be set independently of the control points.
-On-screen temperature display.
-On-screen range & control indicator lights (green, yellow or red)
-Installs easily in minutes.
-Includes one sensor probe (no extra cost)
-TDS Range: 0 - 5000 ppm (CIC-152-N): 0 - 8500 ppm (CIC-152-4)
-EC Range: 0 - 9999 µS
-Temperature Range: 1-80°C; 33-176°F
-Accuracy: ±2% (of the reading)
-Resolution: 0.1 ppm (0-999); 1 ppm (1000-9999)
-TC: Yes (1 - 80 degrees Celsius)
-Calibration: Digital (by push button)
-Factory Calibration: 1413 µS
-Set Points: Adjustable by push button. Control Point 2: Maximum TDS Limit. -Control Point 1: Lower TDS Level.
-Relay Control: The unit will transmit an analog signal (simple switch) via open or closed contacts to a device (e.g. pump/valve) when the ppm/µS level reaches the maximum TDS/EC limit (Control Point 2) or the minimum TDS/EC limit (Control -----Point 1). The contacts are switched back to the normal position once the TDS returns to the acceptable range.
-Relay Voltage: 5V (attached devices must have their own power supply)
-Alarm: Two independent alarms (set by user)
-Display: Bright 5/8" L.E.D. display
-Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable (model SP-1-PSC)
-Power supply: AC 110V / AC 220V
-Dimensions: 7.2 * 7.2 * 11.1 cm (2.8 * 2.8 * 4.4 in.)
-Monitor Weight: 476 g (1 lb .8 oz)
-Total Weight: 680.4 g (1 lb 8 oz)