| Transport Package: | Carton |
|---|---|
| Trademark: | ShowRange |
| Origin: | Shanghai |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
· Tests for Coaxial Cable (BNC), Unshield Twisted Pare (UTP) and Shield Twisted Pair (STP) Cable.
· Automatically checks for open circuit, shorts, miswires and reversals.
· Shield detection tests a cable's shield integrity.
· Easy to read fault display and high speed.
Introduction
The network cable tester is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables.
Features
· Test device used with UTP (Unshield Twisted Pare) and STP (Shield Twisted Pair) wiring.
· Checks continuity and configuration of wiring with unshielded and shielded modular plugs.
· Tests for open circuits, shorts, miswires, reversals and split pairs.
· SHIELD detectiontests a cable's shield integrity.
· Main unit and one remote allow one person to test T568A, T568B, 10Base-T and Token Ring.
· DEBUG quickly identifies which cable pairs have a specific wiring fault.
· Low power indication.
CT6812 LINE TRACKER
Introduction:
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation. For telephone line, it can identify some states in the line, and more convenient to install, debug, maintain telephone line.
Features:
· Judge continuity of the cables or wires.
· Track the cables or wires, and diagnose and break point.
· Receive the tone signal on the cables or wires (telephone line).
· Identify the state in the working telephone line (clear, ring, busy).
· Send a single solid tone or a dual alternating tone to the object cables or wires.
Specifications:
· Send tone frequency: 1.5kHz
· Receive frequency range: 100~300KHz
· Power: 6F22 (9V) x 1
· Size: Receiver 238x43x26mm; Emitter 145x35x25mm
· Wight: Receiver 106g (including battery); Emitter 114g (including battery)
CT1107 Network Toolkit
Item Specifics:
*Is_customized: Yes
*Brand Name: ShowRange
*Model Number: CT1107
*Place of Origin: Shanghai.China
*Main Function : Network tools used in engineering wiring
*Color: Black
*Warranty: 1Year
Included:
1.Wire Tracker CT801B
2.Network Cable Tester CT468
3.Non-contact Voltage Detector CT608
4.Punch Tool CT110
5.Crimping Tool CT178
Main Functions:
* Wire Tracker -Trace locate and verify RJ11 and RJ45 cables.
* Network Cable Tester :Used for verify RJ11/FJ45 cables status.
* Non-contact Voltage Detector :Used for identify hot and neutral conductors, find a break in a wire and detect the AC voltage.
* Punch Tool - Cut not needed cable with the blade and steady function.
* Crimping Tool-8p8c,6p6c cable criper.
CT-HDMI Cable Tester
Item Specifics:
* Is_customized: Yes
* Brand Name: ShowRange
* Model Number: CT-HDMI
* Place of Origin: Shanghai.China
* Port: HDMI- A / C
* Tracking Type: HDMI cable
* Testing Type: HDMI Cable
* Power: 9V Alkaline battery (not included)
* Certificates: CE/ ROHS/ REACH
* Warranty: 1Year
Features:
1. Fast and accurate verification with type A - A, A - C and C - C connectors.
2. Check miswires, short, open and cross status of HDMI cables.
3. Mapping continuity and proper configuration.
4. Displays 19 pin-to-pin and shield connection status on both main and remote unit.
5. Adjustable test modes:Fast/slow scan/manual test for step by step.
6. Design with loopback function.
Attention:
1.Don't connected high voltage lines to avoid buring out the machine.
2.Put into the right place to avoid hurting others,because of the sharp part.
3.Connected the cable to the right port.
4.Read the user manual before use it.
){kind=link}