Hongkong and Shanghai Total Co., Ltd. Is specialized in exporting Measurement & Meter, anemometer, dew point meter, dewpoint meter, portable dewpoint meter, humidity meter, humidity tester, psychrometer, digital psychrometer, insulation tester, lux meter, light meter, moisture meter, moisture tester, wood moisture meter, digital moisture meter, grain moisture tester, soil moisture meter, sound level meter, digital sound level meter, stroboscope, digital stroboscope, tachometer, digital tachometer, temperature meter, thermometer, thickness gauge, coating thickness gauge, ultrasonic thickness gauge, metal thickness gauge, paint thickness gauge, thickness meter, thickness tester, ultrasonic thickness tester, paint thickness meter, coating thickness meter, thermometer, infrared thermometer, digital thermometer, temperature meter, temperature data logger, temperature data recorder.
Model: SR9200
1. FEATURES
This instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various
Machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.
When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism
Inside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier.
The exclusive DSP processes and calculates and then
Outputs the measurement results on LCD.
* Very easy to operate
* Multiple parameter measurement: Ra, Rz
* Highly sophisticated inductance sensor
* Built-in lithium ion rechargeable battery and control
Circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics,
Printing and analysing by the optional cable and the
Software for RS232C interface.
*Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time.
On the other hand, the tester will power itself off about 5 minutes after the last key operation.
2. SPECIFICATIONS
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters: Ra, Rz
Display Range
Ra: 0.05-10.00um/1.000-400.0uinch
Rz: 0.020-100.0um/0.780-4000uinch
Accuracy: Not more than? 0%
Fluctuation of display value: Not more than 6%
Sensor:
Test Principle: Inductance type
Radius of Probe Pin: 10um
Material of Probe Pin: Diamond
Measurement Force of Probe: 16mN(1.6gf)
Probe Angle: 90
Vertical Radius of Guiding Head: 48mm
Maximum driving stroke: 17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
Evaluation length: 1~5 cut off optional
Driving speed:
Sampling length = 0.25mm Vt=0.135mm/s
Sampling length = 0.8mm Vt=0.5mm/s
Sampling length = 2.5mm Vt=1mm/s
Returning Vt=1mm/s
Resolution: 0.001μ M if reading 10μ M
0.01μ M if 10μ M≤ Reading 100μ M
0.1μ M if reading ≥ 100μ M
Power Li-ion battery: Rechargeable
Operating conditions: Temp. 0~5
Humidity <80%
Size: 140x57x48 mm (5.5x2.2x1.9 inch)
Weight: About 420 g
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}