Model SRBH934-1 Barcol Impressor Hardness Tester
TECHNICAL PARAMETERS
Testing Range: 0 - 100 HBa (equivalent to 25 - 145 HBW)
Resolution: 0.5 HBa
Indication Error: ± 2 HBa (42 ~ 48 HBa)
± 1 HBa (81 ~ 88 HBa)
Repeatability Error: ± 2 HBa (42 ~ 48 HBa)
± 1 HBa (81 ~ 88 HBa)
Weight: 0.5 kg
FEATURES
1. Easy to Use: Single hand operation; Easy to use high efficiency able to make test at any site.
2. High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.
3. Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys.
4. Less Thickness Requirement: It can test on any workpieces with thickness greater than 0.8 mm.
5. No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick worpieces and assembly parts.
6. Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table.
7. High Quality Indenter: The test results can be converted to HB, HR, HV and HW easily through the conversion table. The indenter has very high hardness, long service life and good interchangeability.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}